福建省重点城市路面尘负荷及化学组成研究

采集并分析了福建省重点城市厦门、漳州、泉州和莆田城区具有代表性的57个地面扬尘和16个土壤样品的26种无机元素、8种水溶性离子和碳成分等组成.不同城市粒径≤100μm的路面尘负荷平均值在6.99 g.m-2与10.11 g.m-2之间,而粒径≤2.5μm的路面尘(PM2.5)负荷平均值在4.0 mg.m-2和12.5 mg.m-2之间.不同城市土壤尘和路面尘PM2.5中浓度最高的元素都是Si、Ca、Al、Fe和K,路面尘中Ca元素明显富集,而主要人为来源的重金属元素如Cu、Pb、Zn、Cr在路面尘PM2.5中的浓度显著高于土壤尘.漳州城区路面尘PM2.5中二次离子NH4+、NO3-和SO24-的含量明显高于其它地区,厦门、漳州和泉州城区路面尘PM2.5中Mg2+和Ca2+之间都存在显著的正相关关系.四城市路面尘中有机碳(OC)的含量均高于济南、石家庄以及北京地面扬尘OC的含量,元素碳(EC)的含量均低于北京地区路面扬尘EC的含量.泉州和莆田两地OC和EC的相关性较好,说明路面尘中OC和EC有相同或相似的来源.质量平衡结果显示泉州和莆田路面尘PM2.5中含量最高的是土壤尘,其次为有机物.按化学组成特征对路面尘PM2.5进行聚类解析,得到受大气沉降影响、受土壤尘影响、受大气沉降和土壤尘共同作用以及受土壤尘和建筑尘共同作用4类样品.     

电除尘器电源交流分量对PM_(2.5)等细微颗粒物除尘效率的影响

除尘器对颗粒物的除尘效率与颗粒物的荷电量密切相关,PM2.5等细小颗粒物由于其荷电量不足而导致其吸收效率较低,对环境造成危害。为了增加粒子的荷电量,以粒子荷电原理为理论依据,从离子电流密度和通过电凝并扩大尘粒中位径2个方面研究了电除尘电源中交流电压分量对PM2.5等细小颗粒物荷电特性的影响,得出了电除尘器电源中交流电压分量可从以上2个方面提高装置对PM2.5等微小颗粒物的荷电量,且频率越高,幅值越大,荷电效果越好,从而可以提高装置对细小颗粒物的除尘效率。     

2013年苏州春季一次重污染天气的过程分析

研究了2013年3月在江苏范围内的一次重污染天气过程，重点分析苏州在此次污染过程中大气污染的变化特征。污染过程中，苏州市颗粒物浓度上升较为明显， PM10的小时质量浓度最高达548μg／m3， PM2．5质量浓度也达到197μg／m3，污染持续时间为2 d，3月8—9日当地空气质量均达到中度污染水平。根据后向轨迹模型、颗粒物离子浓度的分析，此次污染是由外来浮尘及苏州本地污染物排放所造成的区域霾污染影响所致。根据监测结果与实际污染特征，针对性地提出了对策和措施。     

Traffic climate and driver behaviors: The moderating role of driving skills in Turkey and China

Introduction: While road traffic accidents and fatalities are a worldwide problem, the rates of road traffic accidents and fatalities show differences among countries. Similarly, driver behaviors, traffic climate, and their relationships also show differences among countries. The aim of the current study is to investigate the moderating effect of driving skills on the relationship between traffic climate and driver behaviors by country. (Turkey and China). Method: There were 294 Turkish drivers and 292 Chinese drivers, and they completed the Traffic Climate Scale, the Driving Skills Inventory, and the Driver Behavior Questionnaire. The moderated moderation analyses were conducted with Hayes PROCESS tool on SPSS. Results: The results showed that safety skills moderated the relationship between internal requirements and violations both in Turkey and China. Safety skills also moderated the relationship between internal requirements and errors only in China and the relationship between functionality and violations in Turkey. Perceptual-motor skills moderated the relationships between external affective demands and errors, and also the relationship between internal requirements and positive driver behaviors in Turkey. It can be inferred that driving skills has different influences on traffic climate-driver behaviors relationship in different cultures and there might be cultural differences in the evaluation of drivers’ own driving skills. Practical Applications: Among driving skills, safety skills have a more critical role to increase road safety by decreasing number of violations. Interventions to increase safety skills of drivers might be promising for road safety.     

Hybrid H2/Al dust explosions in Siwek sphere

Explosion indices and explosion behaviour of Al dust/H₂/air mixtures were studied using standard 20 l sphere. The study was motivated by an explosion hazard occurring at some accidental scenarios considered now in ITER design (International Thermonuclear Experimental Reactor). During Loss-of-Vacuum or Loss-of-Coolant Accidents (LOCA/LOVA) it is possible to form inside the ITER vacuum vessel an explosible atmosphere containing fine Be or W dusts and hydrogen. To approach the Be/H₂ explosion problem, Be dust is substituted in this study by aluminium, because of high toxicity of Be dusts. The tested dust concentrations were 100, 200, 400, 800, and 1200 g/m3; hydrogen concentrations varied from 8 to 20 vol. % with 2% step. The mixtures were ignited by a weak electric spark. Pressure evolutions were recorded during the mixture explosions. In addition, the gaseous compositions of the combustion products were measured by a quadruple mass-spectrometer. The dust was involved in the explosion process at all hydrogen and dust concentrations even at the combination ‘8%/100 g/m3’. In all the other tests the explosion overpressures and the pressure rise rates were noticeably higher than those relevant to pure H₂/air mixtures and pure Al dust/air mixtures. At lower hybrid fuel concentrations the mixture exploded in two steps: first hydrogen explosion followed by a clearly separated Al dust explosion. With rising concentrations, the two-phase explosion regime transits to a single-phase regime where the two fuel components exploded together as a single fuel. In this regime both the hybrid explosion pressures and pressure rise rates are higher than either H₂ or Al ones. The two fuels compete for the oxygen; the higher the dust concentration, the more part of O2 it consumes (and the more H₂ remains in the combustion products). The test results are used to support DUST3D CFD code developed at KIT to model LOCA or LOVA scenarios in ITER.     

Effects of particle thermal characteristics on flame microstructures during dust explosions of three long-chain monobasic alcohols in a half-closed chamber

To reveal clearly the effects of particle thermal characteristics on flame microstructures during organic dust explosions, three long-chain monobasic alcohols, solid at room temperature and similar in physical-chemical properties, were chosen to conduct experiments in a half-closed chamber. In the experiments, the dust materials were dispersed into the chamber by air to form dust clouds and the hybrids were ignited by an electrical spark. A high-speed optical schlieren system was used to record the flame propagation behaviors. A fine thermocouple and an ion current probe were respectively used to measure the flame temperature profile and the reaction behaviors of the combustion zone. Based on the experimental results, combustion behaviors and flame microstructures in dust clouds with different thermal characteristics were analyzed in detail. As a result, it was found that the dust flame surfaces were completely covered by cellular structures that significantly increased the flame frontal areas. Flame propagated more quickly and the number of the cellular cells increased as increasing the volatility of the particles. On the contrary, maximum temperature and the thickness of the preheated zone decreased as increasing the volatility of the particles. According to the ion current profile, the particles in the preheat zone were pyrolyzed to intermediate radicals and the radicals' fraction in the higher volatile dust flame was higher than that in the lower volatile dust flame.     

环境磁学在城市地表灰尘重金属污染研究中的应用

随着环境问题日渐突出,地表灰尘重金属污染日益成为研究热点。单纯采用化学方法监测重金属污染具有一定局限性,环境磁学方法以其简便、快捷、经济且无害化的特点在城市重金属污染研究中广为应用。通过文献调研,综述环境磁学在城市地表灰尘重金属污染研究中的应用与研究进展,阐明重金属的主要来源,简述环境磁学的诸多参数,分析磁学参数与重金属的关系,并通过对比不同的磁学分析方法,探讨环境磁学方法在城市地表灰尘重金属污染研究中存在的问题及其发展趋势。     

“一带一路”战略背景下的中国省域绿色发展:现状、问题与对策

以绿色发展推动生态文明建设将会是我国长期面临的重大课题。"一带一路"是我国新时期的对外开放国家战略,涵盖范围广泛,涉及国内18个省域和沿线65个国家,研究"一带一路"战略背景下的中国省域绿色发展,意义重大。本文通过对"一带一路"战略的基本回顾认为,建设绿色"一带一路"是促进我国经济绿色转型、消除国际社会担忧、推进战略顺利实施的必然选择。"一带一路"战略涉及国内18个省份之间的环境污染状况和绿色发展水平差异较大,东部沿海省份的经济发展水平远高于中西部省份,绿色发展水平相对领先,但同时污染物排放量也明显较大。本文进一步探讨了我国省域绿色发展过程中存在的四个问题,即中国绿色经济发展整体水平不高、地区间同质化竞争严重、污染性产业向中西部省份梯度转移、生态环境脆弱,并分别给出了相应的对策建议。     

浙江省工业烟粉尘总量控制研究

通过对浙江省工业烟粉尘排放总量和排放源现状进行分析,提出工业烟粉尘减排治理对策,对工业烟粉尘4个重点行业(水泥制造行业、火力发电行业、钢铁行业(包括炼钢、钢压延加工和黑色金属铸造行业)、纺织染整行业(包括棉印染精加工、化纤织物染整精加工和棉织造加工行业)排放源的烟粉尘减排途径和潜力进行分析测算,研究提出工业烟粉尘总量控制措施和建议。     

北京市道路灰尘中污染物含量沿城乡梯度、道路密度梯度的变化特征

采用网格布点法调查了北京市六环范围内220个样点道路地表灰尘样品中的污染物含量.探讨了样点缓冲区内单位面积道路节点数、道路密度和道路灰尘中污染物含量沿城乡梯度的变化特征及各指标间的相关性.结果表明,各指标在研究区内的变幅较大.沿城乡梯度,道路和污染物主要呈现3种变化趋势:①单位面积道路节点数,道路密度,Cu、Cr和Pb沿城乡梯度降低,且开始时降低较快;②Mn和Cd沿城乡梯度变化的程度较低,均值基本维持恒定;③自中心向外围,Ni和有机碳(TOC)、总氮(TN)先随距离波动降低,随后在郊区均值缓慢增高.道路灰尘中污染物含量趋势转折点位置均大致在距城市中心点15～20 km左右.相关分析表明道路指标和道路灰尘中的Cd含量不具相关性,总硫(TS)、Mn、pH的相关性较弱,与其他各元素的相关性排序为Cu>TN>TOC>Pb>Ni>Cr,较道路密度而言,单位面积节点数和各元素间的相关性更高,该指标可指示道路灰尘中Cu、TN、TOC、Pb、Ni、Cr元素污染.